Halo PD610ED010B Commercial LED Recessed Retrofit Housing for 6", 120-277V 50/60Hz, 0-10V & Phase Cut Dim - 1,000 Lm.

by Halo


Recessed 6 inch aperture LED downlight housing for new construction or remodel application. Use with lens, shallow lens or wall wash reflectors. Available in 1000, 1500, 2000 or 3000 lumens with color temperatures of 2700K, 3000K, 3500K and 4000K in 80 or 90 CRI. Fixture is suitable for commercial constructions. Insulation must be kept 3" from top and sides of housing. Universal input driver with phase cut and 0-10V dimming. Specify housing, module, and trim separately to complete the luminaire.


  • Downlight and wall wash reflectors are available in various finishes
  • Optional NFL / FL beam forming reflector provides long throws of light
  • Housing can be installed from below the ceiling as a remodeler
  • Field adjustable collar accommodates ceiling up to 2" thick
  • Pre-installed bar hangers mounts directly to 24" on center tee grids
  • Universal input driver with phase cut and 0-10V analog dimming to 10%
  • Emergency battery option with integral or remote test switch
  • Optional CCEA rating meets City of Chicago plenum requirements
  • cULus listed, non-IC, thermally protected and ASTM-E283 airtight


  • Parent Company: Eaton Corp.
  • Series: PD6
  • Voltage Rating: 120/277 Volts
  • Wattage: 23/23.2 Watts
  • Amperage Rating: 0.103/0.58 Amps
  • Frequency Rating: 50/60 Hz
  • Lamp Type: LED
  • Lumens: 1000 lumens
  • Average Life: 50000 hr
  • Ballast Type: 0 - 10 volt Dimming Driver
  • Housing Diameter: 6 Inch
  • Recessed Trim Type: Flanged
  • Enclosure Type: IP66
  • Mounting Type: Recessed
  • Ceiling Opening: 6 Inch
  • Overall Height: 26 Inch
  • Overall Width: 7-1/2 Inch
  • Overall Depth: 5 Inch
  • Housing Material: Steel
  • Housing Finish/Color: Galvanized


3 years limited warranty through the manufacturer.

You recently viewed

Clear recently viewed