Lutron EC3DT418KU2 Electronic Ballast, 120/240/277 VAC Fluorescent T4 4-Pin Triple/Quad Tube Lamp for 18W 2-Light Fixture, 0.34 Amp/120V, 0.17 Amp/240V, 0.15 Amp/277 VAC

by Lutron
$140.69

Features

  • Ecosystem ballasts communicate via an ecosystem directly to sensors and controls
  • Dims to 10 percent (5 percent for T4 ballasts)
  • Compatible with 3-wire fluorescent controls
  • Programmed rapid start design ensures full rated lamp life
  • Lamps turn on to any dimmed level without flashing to full brightness
  • Low harmonic distortion throughout the entire dimming range
  • Operating frequency ensures ballast does not interfere with ir devices
  • End-of-lamp-life protection circuitry ensures safe operation
  • Ultra-quiet operation
  • Non-volatile memory restores all ballast settings after power failure
  • Ballasts maintain consistent light output for differing lamp lengths
  • 100 percent performance tested at factory
  • 5 year limited warranty

Specifications

  • Type: High Frequency
  • Dimming Type: Continuous Flicker-Free 100 to 5 Percent
  • Starting Type: Programmed Rapid
  • Circuit Type: HPF
  • Lamp Type: T4
  • Lamp Style: 4-Pin Triple/Quad Tube
  • Number Of Lamps: 2
  • Lamp Wattage: 18 W
  • Input Voltage: 120/240/277 VAC
  • Input Current: 0.34 Ampere at 120 VAC, 0.17 Ampere at 240 VAC, 0.15 Ampere at 277 VAC
  • Input Power: 41.1 W at 120 VAC, 39.4 W at 240 VAC, 39.9 W at 277 VAC
  • Frequency Rating: 50/60 Hz
  • Power Factor: 0.95
  • Ballast Factor: 0.95
  • Maximum THD: 10 Percent
  • Minimum Starting Temperature: 50 Deg F
  • Wiring: Series
  • Size: 4.9 Inch L x 3 Inch W x 1 Inch H
  • Approval: UL 935, CSA C22.2, FCC 18
  • Applicable Standard: ANSI C82.11, ANSI C62.41, ANSI/ESD S20.20, ISO 9001
  • Non-Studded
  • Standby Power: 1 W
  • Maximum Inrush Current: 7 Ampere at 120 VAC/3 Ampere at 277 VAC
  • Maximum Ballast Case Temperature: 75 Deg C
  • Sound Rating Class: A

You recently viewed

Clear recently viewed